diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index f0359455dc205..580c79f301bf8 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -341,6 +341,7 @@ properties: - description: Qualcomm Technologies, Inc. Robotics RB1 items: - enum: + - arduino,imola - qcom,qrb2210-rb1 - const: qcom,qrb2210 - const: qcom,qcm2290 diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml index 5cee033f2115d..2cf58843e54a4 100644 --- a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml @@ -49,6 +49,10 @@ properties: - const: dsi1_phy_pll_out_dsiclk - const: sleep_clk + power-domains: + items: + - description: CX domain + required: - compatible - clocks @@ -57,6 +61,17 @@ required: allOf: - $ref: qcom,gcc.yaml# + # The Shikra variant carried by this branch does not describe the CX domain + # yet, so only demand it on plain qcm2290. + - if: + not: + properties: + compatible: + contains: + const: qcom,shikra-dispcc + then: + required: + - power-domains unevaluatedProperties: false @@ -65,6 +80,7 @@ examples: #include #include #include + #include clock-controller@5f00000 { compatible = "qcom,qcm2290-dispcc"; reg = <0x5f00000 0x20000>; @@ -86,6 +102,7 @@ examples: "dsi1_phy_pll_out_byteclk", "dsi1_phy_pll_out_dsiclk", "sleep_clk"; + power-domains = <&rpmpd RPMPD_VDDCX>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index a1ed1004651b9..6ad466952c02d 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -85,6 +85,11 @@ properties: aux-bus: $ref: /schemas/display/dp-aux-bus.yaml# + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -117,7 +122,6 @@ properties: required: - port@0 - - port@1 required: - compatible @@ -127,6 +131,28 @@ required: - vdd33-supply - ports +allOf: + - if: + required: + - aux-bus + - connector + then: + false + + - if: + required: + - connector + then: + properties: + ports: + properties: + port@1: false + else: + properties: + ports: + required: + - port@1 + additionalProperties: false examples: @@ -185,3 +211,73 @@ examples: }; }; }; + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&pp3300_mipibrdg>; + analogix,audio-enable; + analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + + connector { + compatible = "usb-c-connector"; + power-role = "dual"; + data-role = "dual"; + vbus-supply = <&vbus_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&usb_sbu>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&mipi_dsi>; + bus-type = <7>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 2186af7a9d75a..d0f5cff3286ef 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -380,12 +380,6 @@ allOf: - const: xo description: GPUCC clocksource clock - reg-names: - minItems: 1 - items: - - const: kgsl_3d0_reg_memory - - const: cx_dbgc - required: - clocks - clock-names diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml index f4cf2ce86fcd4..ec1cd684753ad 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -16,7 +16,13 @@ description: properties: compatible: - const: qcom,sm6115-lpass-lpi-pinctrl + oneOf: + - enum: + - qcom,sm6115-lpass-lpi-pinctrl + - items: + - enum: + - qcom,qcm2290-lpass-lpi-pinctrl + - const: qcom,sm6115-lpass-lpi-pinctrl reg: items: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 58ff948d93c96..9bff5f0201082 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -53,6 +53,8 @@ properties: - adi,lt7182s # AMS iAQ-Core VOC Sensor - ams,iaq-core + # Arduino microcontroller interface over SPI on UnoQ board + - arduino,unoq-mcu # Temperature monitoring of Astera Labs PT5161L PCIe retimer - asteralabs,pt5161l # i2c h/w elliptic curve crypto module diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 7fa32190761b6..5c46fe72204b0 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -154,6 +154,8 @@ patternProperties: description: Arctic Sand "^arcx,.*": description: arcx Inc. / Archronix Inc. + "^arduino,.*": + description: Arduino SRL "^argon40,.*": description: Argon 40 Technologies Limited "^ariaboard,.*": diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 9056576bdf7bc..c7de091a5864d 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -220,6 +220,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-arduino-imola.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb diff --git a/arch/arm64/boot/dts/qcom/pm4125.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi index ad410b8c4f6be..ca900948c0b3e 100644 --- a/arch/arm64/boot/dts/qcom/pm4125.dtsi +++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi @@ -37,7 +37,7 @@ }; pm4125_vbus: usb-vbus-regulator@1100 { - compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg"; + compatible = "qcom,pm4125-vbus-reg"; reg = <0x1100>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index d947418302674..7eaba1edd1f22 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -17,6 +17,9 @@ #include #include #include +#include +#include +#include / { interrupt-parent = <&intc>; @@ -552,6 +555,20 @@ bias-disable; }; + qup_uart1_default: qup-uart1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart2_default: qup-uart2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + qup_uart3_default: qup-uart3-default-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "qup3"; @@ -566,6 +583,13 @@ bias-disable; }; + qup_uart5_default: qup-uart5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-disable; + }; + cci0_default: cci0-default-state { pins = "gpio22", "gpio23"; function = "cci_i2c"; @@ -671,6 +695,43 @@ }; }; + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,qcm2290-lpass-lpi-pinctrl", + "qcom,sm6115-lpass-lpi-pinctrl"; + reg = <0x0 0x0a7c0000 0x0 0x20000>, + <0x0 0x0a950000 0x0 0x10000>; + + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + + lpi_i2s2_active: lpi-i2s2-active-state { + sck-pins { + pins = "gpio10"; + function = "i2s2_clk"; + bias-disable; + drive-strength = <8>; + }; + + ws-pins { + pins = "gpio11"; + function = "i2s2_ws"; + bias-disable; + drive-strength = <8>; + }; + + data-pins { + pins = "gpio12"; + function = "i2s2_data"; + bias-disable; + drive-strength = <8>; + }; + }; + }; + gcc: clock-controller@1400000 { compatible = "qcom,gcc-qcm2290"; reg = <0x0 0x01400000 0x0 0x1f0000>; @@ -1197,6 +1258,23 @@ status = "disabled"; }; + uart1: serial@4a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart1_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c2: i2c@4a88000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a88000 0x0 0x4000>; @@ -1244,6 +1322,23 @@ status = "disabled"; }; + uart2: serial@4a88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart2_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c3: i2c@4a8c000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a8c000 0x0 0x4000>; @@ -1302,7 +1397,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; @@ -1418,6 +1513,23 @@ #size-cells = <0>; status = "disabled"; }; + + uart5: serial@4a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart5_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; }; usb: usb@4ef8800 { @@ -1540,7 +1652,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; @@ -2010,6 +2122,7 @@ "dsi1_phy_pll_out_byteclk", "dsi1_phy_pll_out_dsiclk", "sleep_clk"; + power-domains = <&rpmpd QCM2290_VDDCX>; #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; @@ -2085,6 +2198,117 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apcs_glb 8>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = ; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1c1 0x0>; + + dai@0 { + reg = ; + }; + + dai@1 { + reg = ; + }; + + dai@2 { + reg = ; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + + qcom,non-secure-domain; + + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1c3 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1c4 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1c5 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1c6 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1c7 0x0>; + }; + }; }; }; @@ -2210,6 +2434,16 @@ opp-hz = /bits/ 64 <240000000>; required-opps = <&rpmpd_opp_svs>; }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts new file mode 100644 index 0000000000000..9f21fd1f677cf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts @@ -0,0 +1,565 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2025, Arduino SRL + */ + +/dts-v1/; + +#include +#include +#include "qcm2290.dtsi" +#include "pm4125.dtsi" + +/delete-node/ &cont_splash_memory; + +/ { + model = "Arduino UnoQ"; + compatible = "arduino,imola", "qcom,qrb2210", "qcom,qcm2290"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart4; + serial1 = &uart2; + serial2 = &uart3; + sdhc1 = &sdhc_1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + pinctrl-0 = <&key_volp_n>, <&key_vold_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = ; + gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + linux,code = ; + gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + led-bt { + label = "unoq:bt-blue2"; + function = LED_FUNCTION_BLUETOOTH; + color = ; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-panic { + label = "unoq:panic-red2"; + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led-wlan { + label = "unoq:wlan-green2"; + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + ledb: led-user-blue { + label = "unoq:user-blue1"; + gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + color = ; + }; + + ledg: led-user-green { + label = "unoq:user-green1"; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + color = ; + }; + + ledr: led-user-red { + label = "unoq:user-red1"; + gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + color = ; + }; + }; + + multi-led { + compatible = "leds-group-multicolor"; + color = ; + function = LED_FUNCTION_INDICATOR; + leds = <&ledr>, <&ledg>, <&ledb>; + }; + + vreg_anx_30: regulator-anx-30 { + compatible = "regulator-fixed"; + regulator-name = "anx30"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* PM4125 charger out, supplied by VBAT */ + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcm2290/a702_zap.mbn"; +}; + +&i2c0 { + clock-frequency = <100000>; + + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + + status = "okay"; + + anx7625: encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&tlmm 81 IRQ_TYPE_EDGE_FALLING>; + vdd10-supply = <&pm4125_l11>; + vdd18-supply = <&pm4125_l15>; + vdd33-supply = <&vreg_anx_30>; + analogix,audio-enable; + analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + + pinctrl-0 = <&anx7625_int_pin>, <&anx7625_cable_det_pin>; + + connector { + compatible = "usb-c-connector"; + power-role = "sink"; + data-role = "dual"; + try-power-role = "sink"; + + pd-revision = /bits/ 8 <0x03 0x00 0x00 0x00>; + op-sink-microwatt = <15000000>; + sink-pdos = ; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + anx_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + anx_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + anx_dsi0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm4125_l5>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&anx_dsi0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pm4125_vbus { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcm2290/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm2290/modem.mbn"; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm2250-regulators"; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>; + vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>; + vdd_l13_l14_l15_l16-supply = <&pm4125_s4>; + + pm4125_s3: s3 { + /* 0.4V-1.6625V -> 1.3V (Power tree requirements) */ + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-boot-on; + }; + + pm4125_s4: s4 { + /* 1.2V-2.35V -> 2.05V (Power tree requirements) */ + regulator-min-microvolt = <2072000>; + regulator-max-microvolt = <2072000>; + regulator-boot-on; + }; + + pm4125_l2: l2 { + /* LPDDR4X VDD2 */ + regulator-min-microvolt = <1136000>; + regulator-max-microvolt = <1136000>; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l3: l3 { + /* LPDDR4X VDDQ */ + regulator-min-microvolt = <616000>; + regulator-max-microvolt = <616000>; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l4: l4 { + /* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2700000>; + regulator-allow-set-load; + }; + + pm4125_l5: l5 { + /* CSI/DSI */ + regulator-min-microvolt = <1232000>; + regulator-max-microvolt = <1232000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l6: l6 { + /* DRAM PLL */ + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <928000>; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l7: l7 { + /* Wi-Fi CX */ + regulator-min-microvolt = <664000>; + regulator-max-microvolt = <664000>; + }; + + pm4125_l10: l10 { + /* Wi-Fi RFA */ + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + pm4125_l11: l11 { + /* ANX7625 DVDD1P0V/AVDD1P0V */ + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + pm4125_l12: l12 { + /* USB PHYs */ + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <928000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l13: l13 { + /* USB/QFPROM/PLLs */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l14: l14 { + /* SDHCI1 EMMC VCCQ */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + /* Broken hardware, never turn it off! */ + regulator-always-on; + }; + + pm4125_l15: l15 { + /* VDDIO */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l20: l20 { + /* SDHCI1 EMMC */ + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + regulator-allow-set-load; + }; + + pm4125_l21: l21 { + /* USB HS */ + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3300000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l22: l22 { + /* Wi-Fi VDD */ + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm4125_l20>; + vqmmc-supply = <&pm4125_l14>; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + mmc-hs400-1_8v; + mmc-hs200-1_8v; + non-removable; + supports-cqe; + no-sdio; + no-sd; + + status = "okay"; +}; + +&spi5 { + status = "okay"; + + mcu@0 { + compatible = "arduino,unoq-mcu"; + reg = <0>; + }; +}; + +&tlmm { + jmisc_gpio18: jmisc-gpio18-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio28: jmisc-gpio28-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + key_vold_n: key-vold-n-state { + pins = "gpio36"; + function = "gpio"; + bias-pull-up; + output-disable; + }; + + anx7625_cable_det_pin: anx7625-cable-det-pins-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <16>; + output-disable; + bias-pull-up; + }; + + anx7625_int_pin: anx7625-int-pins-state { + pins = "gpio81"; + function = "gpio"; + drive-strength = <16>; + output-disable; + bias-pull-up; + }; + + key_volp_n: key-volp-n-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + output-disable; + }; + + jmisc_gpio98: jmisc-gpio98-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio99: jmisc-gpio99-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio100: jmisc-gpio100-state { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio101: jmisc-gpio101-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart2 { + status = "okay"; +}; + +/* UART connected to Bluetooth */ +&uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&pm4125_l15>; + vddxo-supply = <&pm4125_l13>; + vddrf-supply = <&pm4125_l10>; + vddch0-supply = <&pm4125_l22>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + }; +}; + +/* UART exposed in JCTL */ +&uart4 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3_hs { + remote-endpoint = <&anx_hs_in>; +}; + +&usb_hsphy { + vdd-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + vdda-phy-dpdm-supply = <&pm4125_l21>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + + status = "okay"; +}; + +&usb_qmpphy_out { + remote-endpoint = <&anx_ss_in>; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&pm4125_l7>; + vdd-1.8-xo-supply = <&pm4125_l13>; + vdd-1.3-rfa-supply = <&pm4125_l10>; + vdd-3.3-ch0-supply = <&pm4125_l22>; + qcom,ath10k-calibration-variant = "ArduinoImola"; + firmware-name = "qcm2290"; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 3eedfb2cf4799..8c5f9c79b86a7 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -318,8 +318,8 @@ }; &pm4125_vbus { - regulator-min-microamp = <500000>; - regulator-max-microamp = <500000>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; status = "okay"; }; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index f2d30d8ee4703..0108c46cd4964 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1277,6 +1277,7 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_SYSCON=y CONFIG_LEDS_QCOM_FLASH=m +CONFIG_LEDS_GROUP_MULTICOLOR=m CONFIG_LEDS_QCOM_LPG=m CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_DISK=y diff --git a/drivers/clk/qcom/gcc-qcm2290.c b/drivers/clk/qcom/gcc-qcm2290.c index 1c832f1053be9..abef4ad0a8567 100644 --- a/drivers/clk/qcom/gcc-qcm2290.c +++ b/drivers/clk/qcom/gcc-qcm2290.c @@ -1082,7 +1082,7 @@ static struct clk_init_data gcc_qupv3_wrap0_s0_clk_src_init = { .name = "gcc_qupv3_wrap0_s0_clk_src", .parent_data = gcc_parents_1, .num_parents = ARRAY_SIZE(gcc_parents_1), - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_no_init_park_ops, }; static struct clk_rcg2 gcc_qupv3_wrap0_s0_clk_src = { @@ -1098,7 +1098,7 @@ static struct clk_init_data gcc_qupv3_wrap0_s1_clk_src_init = { .name = "gcc_qupv3_wrap0_s1_clk_src", .parent_data = gcc_parents_1, .num_parents = ARRAY_SIZE(gcc_parents_1), - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_no_init_park_ops, }; static struct clk_rcg2 gcc_qupv3_wrap0_s1_clk_src = { @@ -1114,7 +1114,7 @@ static struct clk_init_data gcc_qupv3_wrap0_s2_clk_src_init = { .name = "gcc_qupv3_wrap0_s2_clk_src", .parent_data = gcc_parents_1, .num_parents = ARRAY_SIZE(gcc_parents_1), - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_no_init_park_ops, }; static struct clk_rcg2 gcc_qupv3_wrap0_s2_clk_src = { @@ -1130,7 +1130,7 @@ static struct clk_init_data gcc_qupv3_wrap0_s3_clk_src_init = { .name = "gcc_qupv3_wrap0_s3_clk_src", .parent_data = gcc_parents_1, .num_parents = ARRAY_SIZE(gcc_parents_1), - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_no_init_park_ops, }; static struct clk_rcg2 gcc_qupv3_wrap0_s3_clk_src = { @@ -1146,7 +1146,7 @@ static struct clk_init_data gcc_qupv3_wrap0_s4_clk_src_init = { .name = "gcc_qupv3_wrap0_s4_clk_src", .parent_data = gcc_parents_1, .num_parents = ARRAY_SIZE(gcc_parents_1), - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_no_init_park_ops, }; static struct clk_rcg2 gcc_qupv3_wrap0_s4_clk_src = { @@ -1162,7 +1162,7 @@ static struct clk_init_data gcc_qupv3_wrap0_s5_clk_src_init = { .name = "gcc_qupv3_wrap0_s5_clk_src", .parent_data = gcc_parents_1, .num_parents = ARRAY_SIZE(gcc_parents_1), - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_no_init_park_ops, }; static struct clk_rcg2 gcc_qupv3_wrap0_s5_clk_src = { diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig index 4846b2e9be7c2..03dc7ffe824a9 100644 --- a/drivers/gpu/drm/bridge/analogix/Kconfig +++ b/drivers/gpu/drm/bridge/analogix/Kconfig @@ -34,6 +34,8 @@ config DRM_ANALOGIX_ANX7625 tristate "Analogix Anx7625 MIPI to DP interface support" depends on DRM depends on OF + depends on TYPEC + depends on USB_ROLE_SWITCH select DRM_DISPLAY_DP_HELPER select DRM_DISPLAY_HDCP_HELPER select DRM_DISPLAY_HELPER diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 836b29fdc8479..513c11cdbc74a 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -3,6 +3,7 @@ * Copyright(c) 2020, Analogix Semiconductor. All rights reserved. * */ +#include #include #include #include @@ -15,6 +16,9 @@ #include #include #include +#include +#include +#include #include #include @@ -1325,7 +1329,7 @@ static int anx7625_read_hpd_gpio_config_status(struct anx7625_data *ctx) static void anx7625_disable_pd_protocol(struct anx7625_data *ctx) { struct device *dev = ctx->dev; - int ret, val; + int ret; /* Reset main ocm */ ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, 0x88, 0x40); @@ -1339,6 +1343,11 @@ static void anx7625_disable_pd_protocol(struct anx7625_data *ctx) DRM_DEV_DEBUG_DRIVER(dev, "disable PD feature fail.\n"); else DRM_DEV_DEBUG_DRIVER(dev, "disable PD feature succeeded.\n"); +} + +static void anx7625_configure_hpd(struct anx7625_data *ctx) +{ + int val; /* * Make sure the HPD GPIO already be configured after OCM release before @@ -1354,6 +1363,18 @@ static void anx7625_disable_pd_protocol(struct anx7625_data *ctx) anx7625_hpd_timer_config(ctx); } +static bool anx7625_need_pd(struct anx7625_data *ctx) +{ + struct fwnode_handle *fwnode; + + fwnode = device_get_named_child_node(ctx->dev, "connector"); + if (!fwnode) + return false; + + fwnode_handle_put(fwnode); + return true; +} + static int anx7625_ocm_loading_check(struct anx7625_data *ctx) { int ret; @@ -1369,7 +1390,9 @@ static int anx7625_ocm_loading_check(struct anx7625_data *ctx) if ((ret & FLASH_LOAD_STA_CHK) != FLASH_LOAD_STA_CHK) return -ENODEV; - anx7625_disable_pd_protocol(ctx); + if (!anx7625_need_pd(ctx)) + anx7625_disable_pd_protocol(ctx); + anx7625_configure_hpd(ctx); DRM_DEV_DEBUG_DRIVER(dev, "Firmware ver %02x%02x,", anx7625_reg_read(ctx, @@ -1472,6 +1495,161 @@ static void anx7625_start_dp_work(struct anx7625_data *ctx) DRM_DEV_DEBUG_DRIVER(dev, "Secure OCM version=%02x\n", ret); } +static u8 anx7625_checksum(u8 *buf, u8 len) +{ + u8 ret = 0; + u8 i; + + for (i = 0; i < len; i++) + ret += buf[i]; + + return ret; +} + +static int anx7625_read_msg_ctrl_status(struct anx7625_data *ctx) +{ + return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, CMD_SEND_BUF); +} + +static int anx7625_wait_msg_empty(struct anx7625_data *ctx) +{ + int val; + + return readx_poll_timeout(anx7625_read_msg_ctrl_status, ctx, + val, (val < 0) || (val == 0), + 2000, 2000 * 150); +} + +static int anx7625_send_msg(struct anx7625_data *ctx, u8 type, u8 *buf, u8 size) +{ + struct fw_msg *msg = &ctx->send_msg; + u8 crc; + int ret; + + size = min_t(u8, size, (u8)MAX_BUF_LEN); + memcpy(msg->buf, buf, size); + msg->msg_type = type; + + /* msg len equals buffer length + msg_type */ + msg->msg_len = size + 1; + + crc = anx7625_checksum((u8 *)msg, size + HEADER_LEN); + msg->buf[size] = 0 - crc; + + ret = anx7625_wait_msg_empty(ctx); + if (ret) + return ret; + + ret = anx7625_reg_block_write(ctx, ctx->i2c.rx_p0_client, + CMD_SEND_BUF + 1, size + HEADER_LEN, + &msg->msg_type); + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, CMD_SEND_BUF, + msg->msg_len); + return ret; +} + +static int anx7625_typec_dr_set(struct typec_port *port, enum typec_data_role role) +{ + struct anx7625_data *ctx = typec_get_drvdata(port); + + if (role == ctx->typec_data_role) + return 0; + + return anx7625_send_msg(ctx, 0x11, NULL, 0); +} + +static const struct typec_operations anx7625_typec_ops = { + .dr_set = anx7625_typec_dr_set, +}; + +static void anx7625_typec_set_orientation(struct anx7625_data *ctx) +{ + u32 val = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, SYSTEM_STSTUS); + + if (val & (CC1_RP | CC1_RD)) + typec_set_orientation(ctx->typec_port, TYPEC_ORIENTATION_NORMAL); + else if (val & (CC2_RP | CC2_RD)) + typec_set_orientation(ctx->typec_port, TYPEC_ORIENTATION_REVERSE); + else + typec_set_orientation(ctx->typec_port, TYPEC_ORIENTATION_NONE); +} + +static void anx7625_typec_set_status(struct anx7625_data *ctx, + unsigned int intr_status, + unsigned int intr_vector) +{ + if (!ctx->typec_port) + return; + + if (intr_vector & CC_STATUS) + anx7625_typec_set_orientation(ctx); + if (intr_vector & DATA_ROLE_STATUS) { + enum typec_data_role data_role = (intr_status & DATA_ROLE_STATUS) ? + TYPEC_HOST : TYPEC_DEVICE; + usb_role_switch_set_role(ctx->role_sw, + (intr_status & DATA_ROLE_STATUS) ? + USB_ROLE_HOST : USB_ROLE_DEVICE); + typec_set_data_role(ctx->typec_port, data_role); + ctx->typec_data_role = data_role; + } + if (intr_vector & VBUS_STATUS) + typec_set_pwr_role(ctx->typec_port, + (intr_status & VBUS_STATUS) ? + TYPEC_SOURCE : TYPEC_SINK); + if (intr_vector & VCONN_STATUS) + typec_set_vconn_role(ctx->typec_port, + (intr_status & VCONN_STATUS) ? + TYPEC_SOURCE : TYPEC_SINK); +} + +static int anx7625_typec_register(struct anx7625_data *ctx) +{ + struct typec_capability typec_cap = { }; + struct fwnode_handle *fwnode __free(fwnode_handle) = + device_get_named_child_node(ctx->dev, "connector"); + u32 val; + int ret; + + if (!fwnode) + return 0; + + ret = typec_get_fw_cap(&typec_cap, fwnode); + if (ret < 0) + return ret; + + typec_cap.revision = 0x0120; + typec_cap.pd_revision = 0x0300; + typec_cap.usb_capability = USB_CAPABILITY_USB2 | USB_CAPABILITY_USB3; + typec_cap.orientation_aware = true; + + typec_cap.driver_data = ctx; + typec_cap.ops = &anx7625_typec_ops; + + ctx->typec_port = typec_register_port(ctx->dev, &typec_cap); + if (IS_ERR(ctx->typec_port)) + return PTR_ERR(ctx->typec_port); + + ctx->role_sw = fwnode_usb_role_switch_get(fwnode); + if (IS_ERR(ctx->role_sw)) { + typec_unregister_port(ctx->typec_port); + return PTR_ERR(ctx->role_sw); + } + + val = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, SYSTEM_STSTUS); + + anx7625_typec_set_status(ctx, val, + CC_STATUS | DATA_ROLE_STATUS | + VBUS_STATUS | VCONN_STATUS); + + return 0; +} + +static void anx7625_typec_unregister(struct anx7625_data *ctx) +{ + usb_role_switch_put(ctx->role_sw); + typec_unregister_port(ctx->typec_port); +} + static int anx7625_read_hpd_status_p0(struct anx7625_data *ctx) { return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, SYSTEM_STSTUS); @@ -1566,7 +1744,7 @@ static void dp_hpd_change_handler(struct anx7625_data *ctx, bool on) } } -static int anx7625_hpd_change_detect(struct anx7625_data *ctx) +static int anx7625_intr_status(struct anx7625_data *ctx) { int intr_vector, status; struct device *dev = ctx->dev; @@ -1593,9 +1771,6 @@ static int anx7625_hpd_change_detect(struct anx7625_data *ctx) return status; } - if (!(intr_vector & HPD_STATUS_CHANGE)) - return -ENOENT; - status = anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, SYSTEM_STSTUS); if (status < 0) { @@ -1604,6 +1779,12 @@ static int anx7625_hpd_change_detect(struct anx7625_data *ctx) } DRM_DEV_DEBUG_DRIVER(dev, "0x7e:0x45=%x\n", status); + + anx7625_typec_set_status(ctx, status, intr_vector); + + if (!(intr_vector & HPD_STATUS)) + return -ENOENT; + dp_hpd_change_handler(ctx, status & HPD_STATUS); return 0; @@ -1622,7 +1803,7 @@ static void anx7625_work_func(struct work_struct *work) return; } - event = anx7625_hpd_change_detect(ctx); + event = anx7625_intr_status(ctx); mutex_unlock(&ctx->lock); @@ -2741,11 +2922,24 @@ static int anx7625_i2c_probe(struct i2c_client *client) } if (!platform->pdata.low_power_mode) { - anx7625_disable_pd_protocol(platform); + if (!anx7625_need_pd(platform)) + anx7625_disable_pd_protocol(platform); + + anx7625_configure_hpd(platform); + pm_runtime_get_sync(dev); _anx7625_hpd_polling(platform, 5000 * 100); } + if (platform->pdata.intp_irq) + anx7625_reg_write(platform, platform->i2c.rx_p0_client, + INTERFACE_CHANGE_INT_MASK, 0); + + /* After getting runtime handle */ + ret = anx7625_typec_register(platform); + if (ret) + goto pm_suspend; + /* Add work function */ if (platform->pdata.intp_irq) { enable_irq(platform->pdata.intp_irq); @@ -2759,6 +2953,10 @@ static int anx7625_i2c_probe(struct i2c_client *client) return 0; +pm_suspend: + if (!platform->pdata.low_power_mode) + pm_runtime_put_sync_suspend(&client->dev); + free_wq: if (platform->workqueue) destroy_workqueue(platform->workqueue); @@ -2774,6 +2972,8 @@ static void anx7625_i2c_remove(struct i2c_client *client) { struct anx7625_data *platform = i2c_get_clientdata(client); + anx7625_typec_unregister(platform); + drm_bridge_remove(&platform->bridge); if (platform->pdata.intp_irq) diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index eb5580f1ab2f8..957d234ec07c8 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -51,9 +51,24 @@ #define INTR_RECEIVED_MSG BIT(5) #define SYSTEM_STSTUS 0x45 +#define INTERFACE_CHANGE_INT_MASK 0x43 #define INTERFACE_CHANGE_INT 0x44 -#define HPD_STATUS_CHANGE 0x80 -#define HPD_STATUS 0x80 +#define VCONN_STATUS BIT(2) +#define VBUS_STATUS BIT(3) +#define CC_STATUS BIT(4) +#define DATA_ROLE_STATUS BIT(5) +#define HPD_STATUS BIT(7) + +#define NEW_CC_STATUS 0x46 +#define CC1_RD BIT(0) +#define CC1_RA BIT(1) +#define CC1_RP (BIT(2) | BIT(3)) +#define CC2_RD BIT(4) +#define CC2_RA BIT(5) +#define CC2_RP (BIT(6) | BIT(7)) + +#define CMD_SEND_BUF 0xC0 +#define CMD_RECV_BUF 0xE0 /******** END of I2C Address 0x58 ********/ @@ -447,9 +462,23 @@ struct anx7625_i2c_client { struct i2c_client *tcpc_client; }; +struct typec_port; +struct usb_role_switch; + +#define MAX_BUF_LEN 30 +struct fw_msg { + u8 msg_len; + u8 msg_type; + u8 buf[MAX_BUF_LEN]; +} __packed; +#define HEADER_LEN 2 + struct anx7625_data { struct anx7625_platform_data pdata; struct platform_device *audio_pdev; + struct typec_port *typec_port; + struct usb_role_switch *role_sw; + int typec_data_role; int hpd_status; int hpd_high_cnt; int dp_en; @@ -479,6 +508,7 @@ struct anx7625_data { struct drm_connector *connector; struct mipi_dsi_device *dsi; struct drm_dp_aux aux; + struct fw_msg send_msg; }; #endif /* __ANX7625_H__ */ diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 4d53c394101a4..f28528ed1c24e 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -686,6 +686,7 @@ static const struct class spidev_class = { */ static const struct spi_device_id spidev_spi_ids[] = { { .name = /* abb */ "spi-sensor" }, + { .name = /* arduino */ "unoq-mcu" }, { .name = /* cisco */ "spi-petra" }, { .name = /* dh */ "dhcom-board" }, { .name = /* elgin */ "jg10309-01" }, @@ -719,6 +720,7 @@ static int spidev_of_check(struct device *dev) static const struct of_device_id spidev_dt_ids[] = { { .compatible = "abb,spi-sensor", .data = &spidev_of_check }, + { .compatible = "arduino,unoq-mcu", .data = &spidev_of_check }, { .compatible = "cisco,spi-petra", .data = &spidev_of_check }, { .compatible = "dh,dhcom-board", .data = &spidev_of_check }, { .compatible = "elgin,jg10309-01", .data = &spidev_of_check }, diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index a34817a4428c9..953b737357103 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -136,6 +136,7 @@ struct qcom_geni_serial_port { unsigned int tx_remaining; unsigned int tx_queued; + bool tx_dma_stale; int wakeup_irq; bool rx_tx_swap; bool cts_rts_swap; @@ -149,6 +150,7 @@ static const struct uart_ops qcom_geni_uart_pops; static struct uart_driver qcom_geni_console_driver; static struct uart_driver qcom_geni_uart_driver; +static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport); static void __qcom_geni_serial_cancel_tx_cmd(struct uart_port *uport); static void qcom_geni_serial_cancel_tx_cmd(struct uart_port *uport); static int qcom_geni_serial_port_setup(struct uart_port *uport); @@ -627,35 +629,34 @@ static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport) return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS); } +static void qcom_geni_serial_flush_buffer_dma(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + + qcom_geni_serial_stop_tx_dma(uport); + port->tx_remaining = 0; + port->tx_queued = 0; +} + static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport) { struct qcom_geni_serial_port *port = to_dev_port(uport); - bool done; - if (!qcom_geni_serial_main_active(uport)) - return; + if (qcom_geni_serial_main_active(uport)) + __qcom_geni_serial_cancel_tx_cmd(uport); if (port->tx_dma_addr) { + writel(1, uport->membase + SE_DMA_TX_FSM_RST); + if (!qcom_geni_serial_poll_bit(uport, SE_DMA_TX_IRQ_STAT, + TX_RESET_DONE, true)) + dev_err_ratelimited(uport->dev, "TX DMA reset failed"); + writel(TX_RESET_DONE | TX_DMA_DONE, + uport->membase + SE_DMA_TX_IRQ_CLR); + geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, port->tx_remaining); port->tx_dma_addr = 0; - port->tx_remaining = 0; } - - geni_se_cancel_m_cmd(&port->se); - - done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, - M_CMD_CANCEL_EN, true); - if (!done) { - geni_se_abort_m_cmd(&port->se); - done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, - M_CMD_ABORT_EN, true); - if (!done) - dev_err_ratelimited(uport->dev, "M_CMD_ABORT_EN not set"); - writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); - } - - writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); } static void qcom_geni_serial_start_tx_dma(struct uart_port *uport) @@ -688,6 +689,7 @@ static void qcom_geni_serial_start_tx_dma(struct uart_port *uport) } port->tx_remaining = xmit_size; + port->tx_dma_stale = false; } static void qcom_geni_serial_start_tx_fifo(struct uart_port *uport) @@ -1020,6 +1022,7 @@ static void qcom_geni_serial_handle_tx_dma(struct uart_port *uport) struct qcom_geni_serial_port *port = to_dev_port(uport); struct tty_port *tport = &uport->state->port; unsigned int fifo_len = kfifo_len(&tport->xmit_fifo); + bool tx_dma_stale = port->tx_dma_stale; /* * Only advance the kfifo if it still contains the bytes that were @@ -1030,12 +1033,13 @@ static void qcom_geni_serial_handle_tx_dma(struct uart_port *uport) * kfifo->in, making kfifo_len() wrap to UART_XMIT_SIZE - tx_remaining * and triggering a spurious large DMA transfer of stale data. */ - if (fifo_len >= port->tx_remaining) + if (!tx_dma_stale && fifo_len >= port->tx_remaining) uart_xmit_advance(uport, port->tx_remaining); geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, port->tx_remaining); port->tx_dma_addr = 0; port->tx_remaining = 0; + port->tx_dma_stale = false; if (!kfifo_is_empty(&tport->xmit_fifo)) qcom_geni_serial_start_tx_dma(uport); @@ -1171,8 +1175,12 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport) uart_port_unlock_irq(uport); } -static void qcom_geni_serial_flush_buffer(struct uart_port *uport) +static void qcom_geni_serial_flush_buffer_fifo(struct uart_port *uport) { + struct qcom_geni_serial_port *port = to_dev_port(uport); + + if (port->tx_dma_addr) + port->tx_dma_stale = true; qcom_geni_serial_cancel_tx_cmd(uport); } @@ -1695,7 +1703,7 @@ static const struct uart_ops qcom_geni_console_pops = { .request_port = qcom_geni_serial_request_port, .config_port = qcom_geni_serial_config_port, .shutdown = qcom_geni_serial_shutdown, - .flush_buffer = qcom_geni_serial_flush_buffer, + .flush_buffer = qcom_geni_serial_flush_buffer_fifo, .type = qcom_geni_serial_get_type, .set_mctrl = qcom_geni_serial_set_mctrl, .get_mctrl = qcom_geni_serial_get_mctrl, @@ -1718,6 +1726,7 @@ static const struct uart_ops qcom_geni_uart_pops = { .request_port = qcom_geni_serial_request_port, .config_port = qcom_geni_serial_config_port, .shutdown = qcom_geni_serial_shutdown, + .flush_buffer = qcom_geni_serial_flush_buffer_dma, .type = qcom_geni_serial_get_type, .set_mctrl = qcom_geni_serial_set_mctrl, .get_mctrl = qcom_geni_serial_get_mctrl,