Windows labels and various features

[Kortex-CR]

Hello, first of all, thank you very much for this very useful utility, especially the script part.
Some practical suggestions:
Would it be possible to rename the windows so that we have an indication of the Modbus information displayed in them (Motor 1, Pump x, etc...)?
The aim is to save a simulation configuration with heterogeneous Modbus zones whose addresses are relatively scattered across the addressable range.
Also, would it be possible to have a configuration menu to define:

• the size of the Modbus area (4 or 5 digits in decimal for address)
  -whether or not to display all zones by type.
  Currently (on 1.6.0), to have a contiguous holding register zone (1-65555), I declare a sheet at address 1 with a length of 125 and a second one at address 65410 with a length of 125. Without this, only the addresses configured in the windows are accessible by the client.

Translated with DeepL.com (free version)

[sanny32]

Would it be possible to rename the windows so that we have an indication of the Modbus information displayed in them (Motor 1, Pump x, etc...)?

Yes it is possible. Please create issue for this feature.

the size of the Modbus area (4 or 5 digits in decimal for address)

Please create issue to implement this feature.

Currently (on 1.6.0), to have a contiguous holding register zone (1-65555), I declare a sheet at address 1 with a length of 125 and a second one at address 65410 with a length of 125. Without this, only the addresses configured in the windows are accessible by the client.

This feature was implemented in 1.8.1 version as Use Global Address Map option at Display Definition Dialog)