This project serves as an example guitar pedal build and some best practices for documentation / builds for UF AES Design
(I also just really wanted a Big Muff)
List out how to go about this jawn
| Phase | Status |
|---|---|
| LTSpice Simulation | ✅ |
| Schematic | ✅ |
| Component Footprints | ✅ |
| PCB | ✅ |
| PART | QTY | Part # |
|---|---|---|
| BC549 NPN Transistor | 4 | Q1, Q2, Q3, Q4 |
| 1N4148 Silicon Diode | 4 | D1, D2, D3, D4 |
| 1N5817 Schottky Diode | 1 | D6 |
| 5mm LED | 1 | D5 |
| 100k Potentiometer | 3 | RV1, RV2, RV3 |
| 470k Resistor | 3 | R4, R8, R14 |
| 430k Resistor | 1 | R19 |
| 100k Resistor | 3 | R10, R13, R20 |
| 47k Resistor | 1 | R2 |
| 33k Resistor | 2 | R1, R17 |
| 22k Resistor | 1 | R18 |
| 15k Resistor | 1 | R21 |
| 10k Resistor | 5 | R5, R7, R9, R12, R15 |
| 4.7k Resistor | 1 | R23 |
| 3.3k Resistor | 1 | R22 |
| 1k Resistor | 1 | R6 |
| 150 Resistor | 2 | R11, R16 |
| 100 Resistor | 1 | R3 |
| 100uF Electrolytic Cap | 1 | C14 |
| 1uF Capacitor | 4 | C1, C3, C6, C8 |
| 100nF Capacitor | 5 | C4, C7, C12, C13, C15 |
| 10nF Capacitor | 1 | C11 |
| 4nF Capacitor | 1 | C10 |
| 470pF Capacitor | 3 | C2, C5, C9 |
| Neutrik NRJ4HF 1/4" Jack | 2 | J1, J2 |
| Barrel Jack w/ Switch | 1 | J4 |
| 2-Pin Header (2.54mm) | 8 | J3, J5, J6, J7, J8, J9, J10, J11 |
| M3 Mounting Hole | 4 | H1, H2, H3, H4 |