Monimoto Home Assistant Integration

Unofficial Home Assistant custom integration for Monimoto GPS motorcycle trackers.

Features

For each Monimoto tracker on your account, the integration creates:

Sensors

• Battery percentage
• Key fob battery percentage
• Tracker temperature
• Device status
• Last message
• Last report time / last known location updated
• Regular ping interval
• SIM status, firmware, IMEI, ICCID, GSM level
• Last known latitude / longitude

Binary sensors

• Battery low
• Battery charging
• SIM deactivated
• Tracking enabled

Device tracker

• Live GPS location (shown on the Home Assistant map)

Controls

• Buttons: Refresh now, Start tracking, Stop tracking, Trigger alarm
• Select: Tracking mode (on/off)
• Number: Snooze duration (60 s – 86 400 s, step 60 s)

Services

• monimoto.refresh – force a data refresh
• monimoto.start_tracking – enable tracking for a device
• monimoto.stop_tracking – disable tracking for a device
• monimoto.snooze – set snooze duration for a device
• monimoto.trigger_alarm – trigger the alarm on a device

Installation

HACS (recommended)

1. Open HACS → Integrations → ⋮ → Custom repositories.
2. Add https://github.com/robinvervoort/monimoto as an Integration.
3. Search for Monimoto and install it.
4. Restart Home Assistant.

Manual

1. Copy the custom_components/monimoto folder to your <config>/custom_components/ directory.
2. Restart Home Assistant.

Setup

1. Go to Settings → Devices & Services → Add integration and search for Monimoto.
2. Enter your Monimoto account email address.
3. Enter the verification code you receive by email.
4. Done — your tracker(s) will appear as devices.

Options

After setup you can change the poll interval (default: 900 s / 15 min) via the integration's Configure button.

Notes

• The Monimoto API is cloud-based (cloud_polling). Location updates depend on the tracker reporting interval, not just the HA poll interval.
• Tracking must be enabled in the app or via this integration for real-time location updates.